To Perform D-Link DAP-1520 Setup — Complete Guide

Introduction The **D-Link** DAP-1520 Wi-Fi Range Extender helps eliminate weak Wi-Fi zones in your home or office by extending your existing network. This compact device is easy to install and can significantly improve your wireless coverage.

Step-by-Step Setup Instructions

1. Power Up the Extender Plug the DAP-1520 into a power outlet near your router. Wait for the LED indicator to show a solid green light, indicating it is powered and ready.

2. Connect via WPS (Wi-Fi Protected Setup) Press the WPS button on your main Wi-Fi router. Within two minutes, press the WPS button on the extender. When the connection is successful, the LED will turn solid green.

3. Manual Setup (If WPS is Unavailable) If your router does not support WPS, you can connect the extender to your mobile or computer via its default network. Follow the on-screen prompts to complete the setup by selecting your existing Wi-Fi network and entering your password.

4. Find the Best Placement After setup, move the extender halfway between your router and the area where you need better coverage. Ensure it receives a good signal from your router for optimal performance.

Tips for Best Results

• Avoid placing the extender near thick walls or metal surfaces.
• Use signal strength indicators on the device to find the ideal spot.

For further assistance, call our support team at +1 (803) 440–8550.