Emergency Mode in Linux | You are in Emergency Mode

When a Linux system boots into emergency mode, it means something critical went wrong during startup — usually related to filesystems, **/etc/fstab, or hardware dependencies**.

This shows detailed logs of the last boot. Look for:

• Errors about mount failures
• Filesystem corruption messages
• Missing devices or UUIDs in /etc/fstab

1. Check /etc/fstab

A bad entry in /etc/fstab is the most common reason for emergency mode.

Look for:

• Wrong device names (e.g., /dev/sdX, wrong UUID, or LABEL)
• Typo in filesystem type
• Missing partitions or drives

Fix common problems:

• open with any editor tool like vim or nano
• vi /etc/fstab
• Comment out the problematic line by adding # at the start
• save and reboot

2. Check for Missing Devices or Disks

If you removed a disk or external drive that’s still listed in /etc/fstab, it can trigger emergency mode.

Options:

• Reconnect the missing drive.

3. Check the live Example given below in Youtube Video

[embed]

Do subscribe , Thanks !

emergencymode #emergencymodelinux