What is height safety harness?

According to the famous phrase of the International Organization for the Protection and Safety of Work (OSHA), a person can work at high altitudes when he is aware of the possible dangers of work and with the necessary safety equipment and tools to act for personal protection. .

When we hear the word height, we involuntarily experience excitement and fear, which is very natural. Jobs such as working on scaffolding or high power towers performed by construction workers. Or workers cleaning the windows of large residential and commercial complexes. And other high-risk jobs that can lead to a person’s downfall are all high-risk and accident-prone jobs in which wearing a safety harness is a very important issue that should not be ignored and safety must be taken in such work. To be observed.

safety harness at height

When the height is low, it will eventually lead to injury or fracture of body parts. But when the altitude is too high, the person faces the risk of death. When we are working at a high altitude, our hands will have practically no support and only a moment of slipping will cause them to fall.

An inhibitory tool that can control a person, and reduce the risk of falls, is called a high-altitude safety harness.

Safety harnesses are among the equipment that is responsible for protecting the health and lives of people. Therefore, they must be of high quality so that in case of danger or problem, you can survive the death.

Features of different types of safety harness

In general, safety equipment deals with protecting the life and health of people. Therefore, when buying, you should make sure of their quality and efficiency so that you can protect your life by trusting these equipment’s in case of any errors or problems in height.

The use of safety harnesses at height has different characteristics, depending on the type of activity that the person performs, so it is better to get complete information about the capabilities of the harness before buying.

Types of safety harness

High-altitude work safety harnesses, as one of the equipment for protecting human health at high altitudes, are divided into two general categories:

Simbani belt

This type of harness is very simple and is placed around the person’s waist and supports. Electricity technicians usually use it when necessary.

The function of this model of harness is such that if a person falls while working, he is held by the waist so that he can be placed in a place again.

There are sections on the harness harnesses to place possible work equipment at a height, and you will no longer need to carry extra objects. This harness has met all the necessary standards and has a very good performance in the field of high altitudes.

Harness Belt

This type of safety harness is a harness that covers the body much better and completely. This safety harness is very high quality and is made of polymer and fiber compounds, which is very strong and durable.

The harness safety harness extends from the shoulders to the thighs. The rope of the harness belt is connected between the two shoulders to the chest and the back of the waist. Therefore, when falling, it distributes all the pressure between the chest, thighs, legs, shoulders and trunk. Due to this, it has high safety and is very suitable for working at heights.

Shocked safety harness

As the name implies, it has a lanyard that is used to control the impact on a person’s body during a fall. This shock absorber is located at the junction of the lanyard and can significantly reduce the impact on the body when falling.

Most of these equipment’s have a very high tolerance threshold, so that they can cover the damage caused by the fall to a large extent.

Parachute safety harness

A parachute safety harness is a type of harness that is commonly used for rescue and high altitude operations. The parachute harness is also used in operations that use a rescue tripod. The reason for naming this product is its use as a safety harness in a parachute.

Large hook safety harness

The large hook safety harness is the same as the full body safety harness (full inflatable) that the lanyard has a large hook.

Two-hook safety harness

The two-hook safety harness is one of the simplest and most practical harnesses available for working at height. Because despite its simple appearance, it has many uses.

The two-hook harness has two lanyards to which the safety harness is attached. Most lanyards are between 1 and 1.5 meters long.

The two-hook safety harness has a variety of uses because it allows the user to always have a connection point when moving. Such as climbing or descending from guards, stairs and masts, construction work and using scaffolding, horizontal lifeline and…

Tips about using height safety harnesses

• All safety harnesses are sized. For this reason, when buying, it is better to make the size of the harness fit the body of the person so that the person can use it easily.

The harness is a personal safety device and each user must use their own harness. If the harness is used by someone else. He may not be aware of the problem for Harness and cause an accident while working.

• Check the harness before each use to make sure it is healthy.

• To wash the harness, you should pay attention to the manufacturer’s agenda. The best way to wash the harness is to use soap and water, and heat it to dry it should be avoided.

• After wearing the harness, you should adjust it to fit your body and make sure that the hanging harness straps are restrained.

Harness have an expiration date. Which is included in the product catalog.

• Due to the high risk in height work activities, use standard harnesses that have a certificate.

Harness have a sewn-on label. Information including serial number, name of the country and company, production date and necessary standards are listed on it.

Harnesses are important both sexually and ergonomically. To both make the user comfortable and distribute the force on the body properly.

• The maximum user weight for the use of harnesses by manufacturers is 140 kg.

• Any change or repair on the harness is only allowed by the manufacturer. Otherwise, the probability of inefficiency in an emergency increases.