How do you remove the cured expanding foam?

The foam expands quickly and gets hard after one hour. You may be lucky to get eight hours depending on the product and where it is used. The best way to remove the dried foam is to clear the surface by scraping it with a utility knife. Use sandpaper to refine the surface. Acetone is a chemical solvent widely available at hardware stores that can dissolve the expanding foam. Consult the manufacturer for instructions. They will usually suggest the solvents like Acetone, a paint thinner to apply on the soft surfaces. Also, you can apply ordinary white spirit which can help you clean and dissolve the foam when dried. Removing cured expanding foam from the wood can be done by using organic solvents that ensure that it doesn’t damage your furniture in the process. They will just remove the foam. To remove the unreachable areas where the foam has to be removed, try using sandpaper for the same. If the cured expanding foam happens to dry on your skin, rub off as much as possible with the pumic stone. You will see the dried flecks coming off your skin.

To know more information, contact our **remove cured expanding foam** expert at 0800 0487051.