How to Install Car Interior and Exterior Lights？

Car outlook upgrades are favored by more and more car owners. Whether it is a professional car enthusiast or an ordinary family car, more and more people will upgrade their cars in various ways. Among them, car lighting upgrade is also the most common one. I believe many people know or have seen the simple plug-and-play ambient light in the car.

AoonuAuto is an online store of auto accessories that specializes in all kinds of car interior lights and car exterior lights. The products sold in this store include car interior atmosphere lights, door sill pedals with logo, car logo door lights, car handle lights, LED floor mats, led car emblem, grille lights, mobile phone holders and daytime running lights, brake lights, car tail lights, truck tail lights, chassis lights and other exterior lights. In addition, they also have professional customization services, not limited to the products sold on the website.

So how are these lights installed on the car? Let’s first distinguish between plug-and-play products and products that require hard-wiring. A plug and play product, as long as we make sure we have the appropriate ports on the car, installation is no problem at all. Just pay attention to the product description or consult customer service when purchasing to ensure that you will not buy the wrong product.

For products that require wiring, no matter what the product is, the principle is simple. Which wire to connect to depends on when you want the led light to turn on and when to turn off. For example, if you want to light up when the car is started, then you need to find the wire that will be energized when the car is started. If you want it to light up when the door is opened and go off when the door is closed, then you can wire it to the line that turns on when the door is opened and then turns off when the door is closed (door switch sensor). Similarly, if you want the lights to turn on and off with the headlights, daytime running lights, brake lights, or turn signals, then connect to the corresponding wires.

Here comes the point, how do we find the correct wire? The wiring of each car model may be different. Sometimes it is difficult for us to find the installation tutorial of the same model on the Internet, but we can refer to it. First of all, we need to be equipped with a test pencil. Then start the vehicle and the corresponding functions, open the hood or the corresponding panel, and find the wiring harness. Use the electric test pen to test each wire. Repeatedly turn on and off the function and test repeatedly to find the correct line. After finding the correct wire, be sure to disconnect the power before wiring, and wrap the exposed wire with insulating tape or other insulating products to prevent leakage and short circuit. Of course, the wiring should pay attention to the positive and negative poles, which need to be determined according to the actual situation of each vehicle. For example, the led car logo car sill, generally this product lights up when the door is opened, and goes out when the door is closed. Most vehicle door switches are mechanical and are controlled by energizing and de-energizing the negative line. At this time, the positive pole of the led logo car sill needs to be connected to the positive line of the appropriate voltage, and the negative pole must be connected to the negative line that controls the door switch.

This article is only a general explanation of the installation of auto lamp parts. A more professional level requires more accumulation. If you are interested in this area, you may wish to read more books or videos related to car maintenance to accumulate, and you can even communicate with professionals in this area and practice.

Car modification is a very attractive thing. When we have more skills and knowledge, we will feel satisfied and proud in our hearts. It adds more color and fun to our life. Who doesn’t want to be someone that others adore!