Lebon MFC16000D Portable Evaporative Cooler — Industrial Workshop Cooling Solution

2026年6月12日星期五

Working in an industrial workshop during hot summer days is extremely tough. Running machines generate intense heat, turning every workstation into a sauna. Workers sweat profusely and need frequent breaks, which cuts productivity in half. The Lebon MFC16000D portable evaporative cooler can quickly disperse sweltering heat and bring the temperature down from 38°C. It is plug-and-play and easy to move to any hot area.

1. Main Challenges of Traditional Workshops

• High temperature & stuffiness: Heat released by machines and crowded staff pushes indoor temperature above 35°C, causing discomfort and lower productivity.
• High energy consumption: Central air conditioning requires high initial investment and expensive operation costs, and cannot cool local hot spots accurately.
• Poor ventilation: Sealed workshops have stale air, accumulated dust and odors, which harm workers’ health.
• Lack of flexibility: Fixed air conditioners cannot be relocated with adjusted workstations and waste power in idle areas.

2. Core Equipment & Advantages

Lebon MFC16000D Portable Evaporative Cooler

It adopts water evaporative cooling technology. Water is atomized through high-efficiency cooling pads. When air passes through the pads, it is cooled rapidly, while air circulation and purification are realized.

ParameterSpecificationCoverage Area150–200 ㎡ per unitAir Supply Distance25 metersRated Power500W (Only 6 kWh for 12 hours operation)Water Tank Capacity160L (Auto / Manual water filling available)Moving DesignUniversal casters for flexible movement

Core Advantages

• Energy-saving & High Efficiency: Power consumption is only 1/5 of central air conditioning, greatly cutting operating costs.
• Flexible Deployment: No installation required, plug and play. It can be moved to hot workstations or crowded areas at any time.
• Healthy & Comfortable: Delivers continuous fresh cool air, exhausts hot air and improves indoor air quality.
• Durable & Reliable: Equipped with brushless DC motor and thickened cooling pads, featuring long service life and low maintenance cost.

3. Zoned Deployment Solutions

3.1 Machining Workshop

Features: Dense large-scale equipment generates massive heat and forms concentrated high-temperature zones.

• Place coolers along workshop aisles, 1 unit per 200 ㎡, blowing air towards machines and operating areas.
• Move coolers beside machine tools and stamping stations for targeted cooling.

Effect: Overall workshop temperature drops by 4–6°C, and local workstation temperature decreases by 8–10°C. Working comfort is improved, and equipment shutdown failures caused by high temperature are reduced.

3.2 Electronic Assembly Workshop

Features: Crowded workers and assembly lines, strict requirements for air circulation and stable temperature.

• Place coolers against walls or along aisles, 1 unit per 150 ㎡, without blocking production lines.
• Aim air outlets at assembly lines, avoid direct airflow on precision electronic components.

Effect: Indoor temperature keeps stable at 26–28°C. Work concentration and productivity rise by 10%-15%. Better air circulation reduces static electricity and dust accumulation to protect electronic parts.

3.3 Multi-storey Factory Workshop

Features: Spacious and high space with obvious temperature difference between floors and poor natural ventilation.

• Arrange coolers evenly on main aisles and crowded areas of each floor, 1 unit per 200 ㎡.
• Make full use of long-distance air supply to form cross-floor air convection and balance overall temperature.

Effect: Temperature difference between floors is eliminated. The whole workshop keeps even temperature, and working comfort on upper floors is greatly improved.

4. Implementation Steps & Cost Analysis

Implementation Steps

1. On-site survey: Measure workshop area, workstation layout and high-temperature zones to confirm quantity and placement of coolers.
2. Equipment placement: Move coolers to designated positions and connect power and water supply.
3. Commissioning: Adjust wind speed and direction, test cooling effect and optimize layout.
4. Maintenance training: Teach staff daily operation, water tank cleaning and cooling pad replacement.

Cost Analysis (1000 ㎡ Workshop)

• Equipment Investment: 5 units required, total investment about $1400.
• Operation Cost: 5 units consume 30 kWh within 12 hours. Daily electricity cost is about $4.2, monthly cost around $126.
• Cost Comparison: Monthly cost of central air conditioning for the same area is about $630. This solution saves $504 per month. The equipment cost can be recovered in approximately 11 months.

5. Solution Highlights & Value

Core Highlights

• Precision Cooling: Targeted air supply for local hot areas to improve cooling efficiency.
• Ultra Energy-saving: Power consumption reduced by 80% compared with central air conditioning.
• Strong Flexibility: Easy to move according to production plans and workstation adjustments.
• Eco-friendly & Healthy: Freon-free, no harmful emissions, effectively improve air quality.
• Immediate Effect: No complicated installation, obvious cooling effect on the deployment day.

Solution Value

• For Workers: Optimize working environment, improve satisfaction and reduce turnover rate in hot seasons.
• For Enterprises: Cut energy costs, raise productivity, reduce equipment failures and realize green production.
• Long-term Value: Long service life and simple maintenance. It is a sustainable cooling solution for industrial workshops in summer.

see more

lebonfan web site

https://lebonfan.com

Evaporative Air Cooler EC3820 https://lebonfan.com/lebon-evaporative-air-cooler-ec3820-1

Industrial Mobile Oscillating Fan EF3025BK https://lebonfan.com/lebon-industrial-mobile-oscillating-fan-ef3025bk

Lebon Mobile Industrial Fan EF4225S https://lebonfan.com/lebon-ef4225s-yi-dong-gong-ye-feng-ji

Leobao Floor-standing Industrial Fan EF3622D https://lebonfan.com/lebon-floor-standing-industrial-fan-ef3622d

Wall Mount Oscillating Industrial Fan EF3025HK https://lebonfan.com/lebon-wall-mount-oscillating-industrial-fan-ef3025hk

Mobile Evaporative Cooler MFC3600 https://lebonfan.com/mobile-evaporative-cooler-mfc3600

Mobile Industrial Air Cooler EC5324D https://lebonfan.com/lebon-mobile-industrial-air-cooler-ec5324d

Portable Industrial Evaporative Air Cooler MFC16000D https://lebonfan.com/lebon-portable-industrial-evaporative-air-cooler-mfc16000d

Stainless Steel Mobile Evaporative Cooler ES1055D https://lebonfan.com/lebon-stainless-steel-mobile-evaporative-cooler-es1055d