HOW To Remove Nest Doorbell 2024

Removing your Nest Doorbell might be necessary for various reasons, like upgrading to a new model, selling your home, or simply relocating the device. Regardless of your motive, the process is straightforward and can be accomplished in just a few minutes with the right tools and instructions.

Photo by Bruno Martins on Unsplash

Before You Begin

Before diving into the removal process, ensure you have gathered the necessary tools:

• Release tool: This small, L-shaped tool is included in the original packaging of your Nest Doorbell. If you can’t find it, a straightened paperclip or thumbtack can be used as a substitute.
• Phillips screwdriver: This is needed for removing the doorbell’s mounting screws (applicable to wired models only).
• Ladder: Depending on the height of your doorbell, you might need a sturdy ladder for safe and comfortable access.

US CITIZENS **CLICK HERE** TO HELP ME

How To Remove Nest Doorbell

The removal process differs slightly depending on whether you have a wired or battery-powered Nest Doorbell. Here’s a breakdown for both models:

Wired Nest Doorbell:

1. Turn off power: As a safety precaution, turn off the power to your doorbell at the breaker box before proceeding.
2. Unscrew the mounting plate: Using your Phillips screwdriver, remove the two screws securing the doorbell’s mounting plate to the wall.
3. Disconnect the wires: Carefully detach the doorbell’s wiring harness from the terminal screws on the mounting plate. Take note of the wire colors for proper reconnection later if you’re reinstalling the doorbell.
4. Release the doorbell: Insert the release tool (or substitute) into the small hole at the bottom of the doorbell. Push up firmly until you hear a click, then pull the doorbell downwards to detach it from the mounting plate.

Battery-powered Nest Doorbell:

1. Press the release tab: Locate the small tab on the top of the doorbell, near the microphone. Press and hold the tab while firmly pulling the doorbell downwards to detach it from the mounting plate.

Additional Tips

• Take pictures: Before disconnecting any wires, take pictures of the wiring configuration for reference during reinstallation.
• Label the wires: If you’re unsure about the wire colors, label them with tape before disconnecting them to avoid confusion later.
• Store the doorbell securely: Keep the doorbell and its mounting plate in a safe place if you’re not reinstalling them immediately.

Conclusion

Removing your Nest Doorbell is a simple task that can be completed in a few minutes with the proper tools and guidance. By following the steps outlined above, you can safely and effectively detach your doorbell from the wall, ready for its next adventure.

Remember:

• Always consult the official Nest Help Center for the most up-to-date instructions specific to your doorbell model.
• If you’re uncomfortable with electrical work, seek assistance from a qualified electrician for the wired doorbell model.