Solution for CO2 cutting and carving control system with unclosed cutting graphics or uneven light output

In the process of using CO2 laser cutting and carving control system, if the cutting shape is not closed or the light output is uneven, it is usually caused by the following factors, which can be investigated and solved according to their actual situation:

1. The starting speed is set too high If the starting speed is too high, the laser head may jump during the initial movement, affecting the accuracy of the cutting pattern. The solution is to reduce the starting speed slightly to ensure the laser head starts smoothly and avoid unnecessary deviations during the jump.

2. The idle speed is too high Idle speed refers to the movement speed of the laser head when not cutting. If the idle speed is too high, the laser head may lose precise positioning during movement, which can affect the cutting accuracy. Adjusting the idle speed to an appropriate range will ensure the laser head moves smoothly during non-cutting operations, preventing cutting quality issues.

3. The cutting speed is too high If the cutting speed is too fast, the laser beam may not stay on the material long enough to cut through it completely, leading to incomplete cuts. Lowering the cutting speed will allow more time for the laser to interact with the material, ensuring better cutting quality.

4. The cutting power is not properly adjusted Improper laser power settings can lead to uneven energy distribution, which affects cutting results. Low power may not cut through the material, while excessive power can cause the material to burn or melt. Adjusting the cutting power to the correct level ensures that the laser can cut through the material evenly and effectively.

For more professional knowledge on laser processing controllers, troubleshooting, and design file downloads, please visit Chanelink.